South Africa Round Bottom Headspace Vials Blue Ptfe/White Silicone Septa

Thomas Scientific’s continuous support and ongoing communication with site buyers to secure and deliver critical PPE during the COVID-19 pandemic were critical in avoiding site production interruptions. They were responsive and flexible, adjusting their allocations to meet AbbVie’s needs. One stop solution for your lab consumables and

Vials&Caps, ND8 8-425 Screw Neck vial Cat.No. Description PK AV1000-0 1.5ml screw neck vial, 8-425 thread, clear glass 100/pk AV1010-0 1.5ml screw neck vial, 8-425 thr

Parts: Cap & Septa. White PTFE/White Silicone + Aluminium cap with hole, for 6ml/10ml/20ml 20mm crimp top vial. 10ml Clear Headspace vials, 20mm Crimp top,Bevelled,Round/Flat bottom 100pcs/pk. Top/Cap Type: 20mm Crimp top.

Jan 27, 2016 · The cover locks the liner in place and prevents vial pullout. The prescored PTFE/Silicone/PTFE liner permits easy needle penetration, while the molded PTFE/Silicone mat locks into each of the 96 vials and reseals after multiple injections thus reducing the chance of solvent evaporation and cross contamination.

Analytical Vials. Vials play a significant role in analytical analysis and result reproducibility. Vials must be inert and free of extractables or leachables to prevent affecting results. Using certified, application-specific, contaminant-free vials can significantly reduce risk. We offer a broad spectrum of Supelco ® products including

70261 - (septa only) PTFE virginal, white 53° shore D 0.25 mm 100 / PE bag 702070 - (septa only) Red Rubber / FEP colorless 45° shore A 1.3 mm 100 / PE bag 70248 - (septa only) Silicone white / PTFE red 45° shore A 1.3 mm 100 / PE bag 702481 - (septa only) Silicone white / PTFE blue, slit 55° shore A 1.0 mm 100 / PE bag Vial Kits screw neck N 8

Approximately 0.05 mm (0.002" thick with taper of approximately 1.10 on diameter. Eliminates the need for lubrication and and prevents frozen or leaky ground joints. Can be used over a temperature range of-75 to +260 C. PTFE- Polytetrafluoroethylene aka Teflon PTFE is opaque and has the lowest coefficient of friction of any solid.

Silicone/PTFE liners for high analytical purity and with a temperature resistance from -60°C up to 200°C. Easy penetration. Replacement septa are not offered for all cap types and sizes, as manual assembly is not recommendable due to contamination risk and possible wrong

High purity Silicone/PTFE septum for reliable analysis results even in sophisticated analyses. Temperature restistance:-60°C up to 200°C. Replacement septa are not offered for all cap types and sizes, as manual assembly is not recommendable due to contamination risk and possible wrong

20mm Clear Headspace Crimp Vial, Beveled Edge, Round Base (C4020-2) Silver Pressure Release Crimp Cap, 7.5mm hole (C4020-32AP) Tan PTFE/White Silicone. 1000. 20-HSVST201-CP. 18mm Clear Headspace 20mL Screw Vial, Round Bottom, (20-HSV) Silver Steel Screw Cap, 8mm hole (18-MSCST201) 18mm Blue Silicone/ Natural PTFE. 125.

Vials. 9512C-0CV-T-RS: MRQ Snap/Crimp Top Vials w/ RSA Glass 9512S-0CV-T-RS: MRQ Screw Top Vials w/ RSA Glass 9509S-WAV-RS: 2mL, 9mm Screw Top Vials w/ Write On Patch, Amber 9509S-WCV-RS: 2mL, 9mm Screw Top Vials w/ Write On Patch, Clear 9502S-02N-RS: Inserts, 6x29mm, 200ul, w/attached plastic springs 9512C-0CV-RS: 1.5ml vials, clear, Max Recovery center draining snap top 9512S-0CV-RS: 1.5ml

Round Bottom Headspace Vials. caps Two sizes: 23 x 75 and 23 x 46 mm Round bottom glass headspace vials feature a 20 mm beveled crimp top that creates a much tighter seal than you get with a flat crimp surface. Vials are designed for use with Perkin-Elmer, Tekmar and Varian. Vials are heat annealed to 530°C.

ND18 Magnetic Screw Cap (8mm hole) with Butyl/PTFE Septa, 1.6mm, 55° shore A, pk.100 (old part number 18031416) ND18 Magnetic Screw Cap (8mm hole) with Silicone/PTFE Septa (blue/white), 1.3mm, 45° shore A , pk.100 (old part number 18031309)

PET Bottles - Transparent Plastic Bottles Latest Price Company Video. View Mobile Number. Call +91-7942565598. Contact Supplier Request a quote. Transparent 20 Ml Pet Bottles For

Septa material: Silicone/PTFE, slit: Colors of septa material: Beige/white: Septa thickness: 1.3 mm: Septa hardness: 45° shore A: Additional cap features: 9 mm thread is not standardized: Additional closure features: Slit as penetration aid for blunt HPLC needles and for avoidance of a vacuum inside the vial in case of multiple injections